DitoGear™ VibraFreek converts your car and existing 3rd party gimbal into a high-end rig allowing to capture quality footage from moving vehicles regardless the environment.
Perfect moving vehicle shots at a fraction of price
Gimbal stabilizers still require vibration dampeners to allow perfect smooth shots. Such dampeners used to be very expensive. Not anymore. DitoGear™ VibraFreek can be adapted to work on any standard car and with a 3rd party gimbal stabilizer, such as ACR Systems (formerly BeSteady), DJI Ronin, MOVI or NEWTON. VibraFreek makes a complete high-end setup for achieving silky smooth shots in motion at a fraction of price.
- Compatible with all gimbals
- Dampening system
- Can drive and shoot up to 100km/h
- 38 kg payload*
- Arm range 35cm
*DitoGear™ HD Springs allow you to increase the payload to 38 kg (83.78 lb).
DitoGear™ VibraFreek arm mounts directly to the SpiderMount Baseplate. 4 adjustable arms make it easy to rig it to a vehicle that has already some basic grip points available using. Suction cups can be used as well, but are not recommended for safety and performance reasons. See technical specs for SpiderMount details.
For the best performance DitoGear™ recommends the Pillar configuration. The pillar allows for simple vertical positioning of the camera and gimbal rig. This mounting option will require custom work to be done on the vehicle including welding to the rigid parts of the car. The bottom end of the pillar mounts to a support frame which is welded or fixed to the car frame near the front or rear fender. The Pillar Support Arm is hinge-mounted to the top of the pillar and to available supports on the roof of your car. The Pillar Support Arm may have different sizes and shapes depending on your vehicle.
What is included?
|DitoGear™ VibraFreek Bundles||VibraFreek w/ Pillar Mount Bundle||VibraFreek w/ Spider Mount Bundle|
|VibraFreek Arm with Vibrafreek Upgrade|
|Pillar (200 cm)|
|Pillar Truss Cage|
|Pillar Support Arm|
|40mm Tube Clamp|
|Pillar Support Arm Mounting Hinge|
|XY module||Not included – buy extra||Not included – buy extra|
|DJI Ronin Mounting adapter||Not included – buy extra||Not included – buy extra|
|HD Springs||Not included – buy extra||Not included – buy extra|
|Payload (Standard Springs1)||25kg (55.12lb)|
|Payload (HD Springs)||38kg (83.78lb)|
|Max. speed of a vehicle2||100km/h|
|Arm movement range3||35cm|
Dimensions & weights
|Vibration Dampening Arm||53x16x22 [cm]||6.5kg|
|Pillar Support Arm4||252x97x5 [cm]||12kg|
|Pillar Truss Cage||31x14x16 [cm]||3.8kg|
|XY Module||17x16x17 [cm]||2.3kg|
1 Included in VibraFreek bundles.
2 Tested on a flat road.
3 It’s regarding the Vibrafreek Vibration Dampening Arm.
4 That’s the maximum possible size of the Pillar Support Arm. Dimensions should be matched to the vehicle.
> DJI Ronin Mounting Adapter
> Other Adapters for different gimbals available upon request at ditogear.com/support/.